NBR elevator belting

NBR elevator belts are anti-static. The plies are polyester interwoven with Nylon layers. The belt is made out of NBR (Nitrile Butadiene Rubber). The covers make it possible that the elevator bolt head will fit and countersunk perfectly. These belts are available in several breaking loads and thicknesses.

NBR covers are suitable for transporting products with a higher fat, oil content and a limited acid content. Ideal for the feedmill industry and raw materials intake such as sunflower seeds, fish meal, tapioca and mais. But also for polluted glass cullets.

Belts are cut and punched according to customers specifications. 

Download PDF NBR Belt
Banden-monster-zwart.png
Technical specifications NBR
Production requirements acc. DIN 22102 and 22104
Pre stretched plies Nylon / Polyester
Elongation  Max. 1,5% 
Covers SBR 60° Shore A 
Breaking load covers  >= 15 N/mm 
Abrasion <= 180 mm³ 
Density of covers 1,20 +/- 0,3 g/cm³ 
Temperature resistance -25 till + 100 peak 120 °C 

 

NBR elevator belting
Type of band Breaking load Nr. of inserts Covers Thickness Weight/m2  Pulley-Ø*
400/3 400 kg/cm2 3 1+1 mm 5 mm 6,6 kg 315 mm
400/3 400 kg/cm2 3 2+2 mm 7 mm 7,8 kg 315 mm
500/4 500 kg/cm2 4 1+1 mm 6 mm 7,8 kg 400 mm
500/4 500 kg/cm2 4 2+2 mm 8 mm 9,0 kg 400 mm
630/4 630 kg/cm2 4 1+1 mm 7 mm 9,0 kg 500 mm
630/4 630 kg/cm2 4 2+2 mm 9 mm 10,2 kg 500 mm
800/5 800 kg/cm2 5 1+1 mm 8 mm 10,8 kg 630 mm
800/5 800 kg/cm2 5 2+2 mm 10 mm 11,4 kg 630 mm
1000/5 1.000 kg/cm2 5 1+1 mm 8 mm 12,0 kg 800 mm
1000/5 1.000 kg/cm2 5 2+2 mm 10 mm 12,6 kg 800 mm
1250/5 1.250 kg/cm2 5 2+2 mm 12 mm 14,4 kg 1.000 mm

* Recomended minimal pulley diameter (60 - 100% use of breaking load)