Starco elevator buckets

Starco elevator buckets made of pressed steel (mild or stainless steel) and plastic (HDPE or Nylon) are suitable for a variety of different products. The relatively low rear height of the buckets allows a considerable bucket density (buckets per meter). The low rear height and the relatively large projection guarantee that the Starco bucket easily ejects its product even at high belt speeds. This makes it possible to attain a higher capacity.

Data Starco SteelData Starco plastic

Download PDF Starco Buckets
starco-kunststof-staal.png

Starco Steel

 

Starco elevator buckets made of steel/stainless steel (parameters in mm)

Type Size/weight Volume Holes Max.
  b a h1 h2 t Kg Z2 Z3 d e Nr Buckets/m
S100 106 89 62 36 0,9 0,12 0,29 0,19 8,5 50 2 15,00
S120 126 100 72 49 0,9 0,21 0,55 0,40 8,5 67 2 13,00
S130 136 114 78 51 1,5 0,35 0,61 0,41 8,5 70 2 12,00
S140 145 115 86 49 1,5 0,37 0,85 0,65 9,0 86 2 11,00
S160 165 125 90 59 1,5 0,50 1,15 0,85 8,5 101 2 10,50
S180 185 140 92 56 1,5 0,53 1,29 0,90 8,5 100 2 10,50
S200 205 140 100 67 1,5 0,71 1,75 1,25 11,0 131 2 9,50
S230 238 165 108 68 2,0 1,01 2,25 1,65 11,0 120 2 9,00
S250 255 151 107 70 2,0 1,14 2,60 1,95 11,0 77 3 9,00
S280 289 165 108 68 2,0 1,32 2,91 2,08 11,0 80 3 9,00
S300 x 180 308 190 117 68 2,0 1,43 3,66 2,46 11,0 100 3 8,13
S300 x 215 310 217 140 86 2,0 2,05 5,50 4,00 11,0 100 3 7,14
S330 340 214 130 81 2,0 2,09 5,51 3,92 11,0 120 3 7,14
S350 360 188 134 87 2,0 2,25 5,75 4,05 11,0 90 4 7,14
S370 381 214 130 82 2,0 2,38 6,18 4,18 11,0 90 4 7,14
S400 410 198 142 93 2,0 2,58 7,00 5,00 13,0 100 4 7,00
S450 464 214 130 82 2,5 3,40 8,00 5,59 11,0 90 5 7,14
S500 512 223 160 104 2,5 3,78 11,00 8,00 13,0 100 5 6,00

Z2 = gross volume in liters, Z3 = net volume in liters.
Claus elevator buckets are also available in thicknesses (t) of 2.5 and 3.0 mm.

Special designs with differing hole spacing are possible in some cases.

===

 

Starco Plastic

   

VAV supplies plastic Starco elevator buckets made of PEHD and nylon ex stock. Besides, PU and zytel are also available. Plastic elevator buckets lend themselves particularly well to the transport of wet, sticky or fatty products. Another advantage is that plastic elevator buckets do not strike a spark even if the belt is misaligned.

Starco elevator buckets made of plastic (parameters in mm)

Type Size/weight Volume Holes Max.
  b a h1 h2 t Kg Z2 Z3 d e Nr Buckets/m
S100 x 90 HDP 109 90 62 39 4,0 0,06 0,35 0,23 8,5 50 2 14,28
S130 x 120 HDP 140 121 81 54 4,7 0,13 0,70 0,50 8,5 70 2 11,11
S150 x 110 HDP 159 113 78 51 5,2 0,17 0,72 0,49 9,0 89 2 12,00
S180 x 140 HDP 190 146 94 56 6,0 0,22 1,25 0,90 9,0 100 2 10,50
S225 x 140 HDP 235 140 94 60 6,0 0,34 1,67 1,16 9,0 120 2 10,50
S230 x 170 HDP 240 173 110 70 6,0 0,43 2,32 1,75 11,0 120 2 9,00
S280 x 170 HDP 290 173 113 72 6,0 0,50 3,00 2,28 11,0 80 3 9,00
S300 x 180 HDP 314 181 124 81 6,0 0,58 3,85 2,70 9,0 100 3 8,13
S330 x 215 HDP 342 220 141 92 8,5 0,93 5,90 4,51 11,0 120 3 7 ,14
S350 x 180 HDP 367 181 124 85 7,0 0,79 4,50 3,30 9,0 90 4 8,13
S370 x 215 HDP 380 218 141 90 9,0 1,07 6,30 4,60 11,0 90 4 7,14

Z2 = gross volume in liters, Z3 = net volume in liters.