Steel Starco elevator bucket

Starco steel

Starco elevator buckets made of pressed steel (ST37 or stainless steel) are suitable for a variety of different products. The relatively low rear height of the buckets allows a considerable bucket density (buckets per meter).

The low rear height and the relatively large projection guarantee that the Starco bucket easily ejects its product even at high belt speeds. This makes it possible to attain a higher capacity.

For the Starco capacity table you can download the following document: Download Capacity Starco.

For basic measurements of a (Super) Starco elevator you can use the following document. » Download basic size Starco

starco-bucket-steel-c

Starco elevator buckets made of steel/stainless steel (parameters in mm)

TypeSize/weightVolumeHolesMax.
 bah1h2tKgZ2Z3deNobckts/m
S100 106 89 62 36 0,9 0,12 0,29 0,19 8,5 50 2 15,00
S120 126 100 72 49 0,9 0,21 0,55 0,40 8,5 67 2 13,00
S130 136 114 78 51 1,5 0,35 0,61 0,41 8,5 70 2 12,00
S140 145 115 86 49 1,5 0,37 0,85 0,65 9,0 86 2 11,00
S160 165 125 90 59 1,5 0,50 1,15 0,85 8,5 101 2 10,50
S180 185 140 92 56 1,5 0,53 1,29 0,90 8,5 100 2 10,50
S200 205 140 100 67 1,5 0,71 1,75 1,25 11,0 131 2 9,50
S230 238 165 108 68 2,0 1,01 2,25 1,65 11,0 120 2 9,00
S250 255 151 107 70 2,0 1,14 2,60 1,95 11,0 77 3 9,00
S280 289 165 108 68 2,0 1,32 2,91 2,08 11,0 80 3 9,00
S300 x 180 308 190 117 68 2,0 1,43 3,66 2,46 11,0 100 3 8,13
S300 x 215 310 217 140 86 2,0 2,05 5,50 4,00 11,0 100 3 7,14
S330 340 214 130 81 2,0 2,09 5,51 3,92 11,0 120 3 7,14
S350 360 188 134 87 2,0 2,25 5,75 4,05 11,0 90 4 7,14
S370 381 214 130 82 2,0 2,38 6,18 4,18 11,0 90 4 7,14
S400 410 198 142 93 2,0 2,58 7,00 5,00 13,0 100 4 7,00
S450 464 214 130 82 2,5 3,40 8,00 5,59 11,0 90 5 7,14
S500 512 223 160 104 2,5 3,78 11,00 8,00 13,0 100 5 6,00

Z2 = gross volume in liters, Z3 = net volume in liters.
Starco elevator buckets are also available in thicknesses (t) of 2.5 and 3.0 mm.

»  Download Basic size Starco