Atlas elevator bucket

Atlas elevator buckets

The Atlas industrial elevator buckets, injected into a mold, are made of a very tough and non-abrasive nylon. These buckets are temperature resistant between - 40 °C and + 110 °C. Besides, the Atlas elevator buckets have a trilateral edge reinforcement.

atlas-c

Atlas elevator buckets (parameters in mm)

TypeSize/weightVolumeMax.
 bah1h2tKgZ2Z3bkrs/m
AA54TN 134 105 105 74 7,0 0,23 0,74 0,57 7,0
AA64TN 160 105 105 74 7,0 0,27 0,89 0,68 7,0
AA74TN 184 105 105 74 7,0 0,30 1,07 0,84 7,0
AA75TN 180 130 134 93 8,0 0,44 1,55 1,26 5,7
AA85TN 206 130 134 93 8,0 0,50 1,83 1,47 5,7
AA95TN 232 130 134 93 8,0 0,54 2,00 1,66 5,7
AA96TN 238 156 156 108 8,5 0,67 2,80 2,17 5,0
AA106TN 264 156 156 108 8,5 0,73 3,14 2,43 5,0
AA116TN 290 156 156 108 8,5 0,77 3,43 2,68 5,0
AA126TN 320 165 160 108 8,5 0,95 4,10 3,08 5,0
AA127TN/S 305 178 178 98 7,0 0,92 4,10 2,95 4,5
AA127TN 314 180 180 125 9,0 1,13 5,25 4,00 4,5
AA147TN 365 180 180 125 9,0 1,25 6,30 4,89 4,5
AA148TN 365 206 206 142 11,0 1,94 7,60 5,76 4,0
AA168TN 416 206 206 142 12,5 2,10 8,85 6,66 4,0
AA188TN 460 206 206 142 12,5 2,38 10,15 7,66 4,0
AA1810TN 460 258 258 168 12,5 3,60 14,80 11,0 3,0

Atlas elevator buckets black nylon (parameters in mm)

TypeSize/weightVolumeMax.
 bah1h2tKgZ2Z3bkrs/m
AD300 361 202 215 111 14,0 1,70 6,75 4,13 3,8
AD400 424 247 286 156 11,0 2,75 14,33 9,00 3,0
AD500 524 274 321 176 12,0 5,03 23,20 15,70 2,7
AD630 654 306 363 198 12,0 8,25 36,00 23,40 2,5

Z2 = gross volume in liters, Z3 = net volume in liters.
The material thickness "t" was measured on the backside of the bucket.
These elevator buckets have no holes, but holes may be drilled according to the customer's specifications.